Skip to content
StringandStock

Nock patterns

Types of crossbow nocks

The cheapest part of the arrow is the one that can hurt you. Four patterns are in use, they are not interchangeable, and your bow decides which one you get.

By Mike M.Updated

String & Stock earns a commission when you buy through our links, at no extra cost to you. Prices come from Amazon and change; the date beside every price is when we last verified it. Full disclosure.

TenPoint Pro Elite 400 from TenPoint
Top pickNock patterns
TenPoint Pro Elite 400 from TenPoint

TenPoint Pro Elite 400

TenPoint
9.5/ 10Six matched 20-inch shafts with the front-of-center figure published

Six 20-inch shafts inspected to .

Read the full assessment

Ranked

Quick picks

#ProductNockScorePrice
Rank 1
TenPoint Pro Elite 400 from TenPoint

TenPoint Pro Elite 400

Six matched 20-inch shafts with the front-of-center figure published

Alpha-Nock HP with HP aluminum bushing9.5$84.99Pro Elite 400
Rank 2
Nightmare Xtreme Crossbow Bolts, Half-Moon and Capture Nocks from Nightmare Xtreme

Nightmare Xtreme Crossbow Bolts, Half-Moon and Capture Nocks

One 20-inch pack that fits a moon-nock bow and a capture-nock bow

Both patterns supplied: green half-moon and capture nocks included9.2$34.99Crossbow Bolts, Half-Moon and Capture Nocks
Rank 3
Bloodsport Witness 20-inch from Bloodsport

Bloodsport Witness 20-inch

The best-specified budget bolt

Half-moon, installed9.4$36.30Witness 20-inch
Rank 4
Killer Instinct KillerTech Lighted 20-inch from Killer Instinct

Killer Instinct KillerTech Lighted 20-inch

Lighted bolts for a Killer Instinct

Half-moon, lighted, fitted at the factory9.1$49.99KillerTech Lighted 20-inch
Rank 5
Excalibur Diablo 18-inch from Excalibur

Excalibur Diablo 18-inch

Excalibur Matrix series bows

Rhino, flat; CeaseFire compatible9.0$61.94Diablo 18-inch

#ad Prices come from Amazon and change. How this site is funded. Scores are our published rubric — how we evaluate.

The short answer

Crossbow nocks come in four patterns: half-moon, with a curved groove the string sits into; flat, with a square base and no groove; capture or C-nock, which wraps around the string; and proprietary bushed nocks such as TenPoint's Alpha-Nock or Killer Instinct's V-Track. Your bow decides which one you use, and the patterns are not interchangeable.

A nock costs less than a vane and does more damage when it is wrong than anything else on the arrow. It is the only component that touches the string, which means it is the one deciding whether the string pushes the arrow straight down the rail or slides over the top of it. Get it wrong and the best case is a flyer; the worst case is a string that jumps the nock entirely and sends the bow's full stored energy into itself.

This page is the pattern-by-pattern reference. If you are still working out length, diameter and total arrow weight, start with what size crossbow bolts do I need - that page runs the whole sizing checklist, and this one goes deep on the one item in it that is a safety check rather than a preference.

In detail

A bolt pack for each nock pattern

01Six matched 20-inch shafts with the front-of-center figure published

TenPoint Pro Elite 400

TenPoint
9.5/ 10

Six 20-inch shafts inspected to .003 inch straightness, hand-sorted for weight to within 2 grains per dozen, and fitted with a 46-grain aluminum insert that TenPoint publishes as 13 percent front-of-center. The Alpha-Nock HP is the other half of it: a deep groove on an aluminum bushing, which TenPoint credits with 28 percent more string-to-nock engagement on its narrow bows.

Published specValue
Length20 in
Weight400 gr (model designation)
Straightnesswithin .003 in
Weight sortingwithin 2 gr per dozen
Insert46 gr aluminum
Front of center13%
Per pack6
NockAlpha-Nock HP with HP aluminum bushing
Vanes3.5 in Bohning X Vanes, slight offset

Why we recommend it

  • Straightness, weight sorting, insert mass and front-of-center all published
  • Six per pack, which is a full quiver and a spare in one box
  • The Alpha-Nock's deep groove is designed against shoot-over on narrow bows
  • An aluminum bushing under the nock rather than bare carbon

Good to know

Dearest 20-inch six-pack here by a clear margin

Our rubric

Flight
9.7
Penetration
9.3
Consistency
9.7
Durability
9.4
Value
9.0
02One 20-inch pack that fits a moon-nock bow and a capture-nock bow

Nightmare Xtreme Crossbow Bolts, Half-Moon and Capture Nocks

Nightmare Xtreme
9.2/ 10

The 20-inch pack on this site whose listing solves the nock problem by putting both answers in the box: green half-moon nocks and capture nocks, six shafts, inserts already installed. It also publishes what the name brands at this price often do not — straightness to plus or minus .003 inch or better and weight sorted to plus or minus 2 grains. The shafts are 300 grains bare, so a 100-grain point puts you at 400.

Published specValue
Length20 in
Per pack6
NockBoth patterns supplied: green half-moon and capture nocks included
Straightness+/- .003 in or better
Weight tolerance+/- 2 gr
Shaft weight300 gr (400 gr with a 100 gr point)
InsertsIncluded and installed
VanesNot published

Why we recommend it

  • Both nock patterns in one box, so the compatibility question largely goes away
  • A straightness tolerance and a weight tolerance both published, which the pack it replaced did not have
  • Inserts already installed, so the pack is ready to take a point out of the box
  • Six per pack at the bottom of six-pack money

Good to know

A house brand with no track record behind it, unlike TenPoint or Gold Tip

Our rubric

Flight
9.0
Penetration
8.9
Consistency
9.3
Durability
8.8
Value
9.7
03The best-specified budget bolt
Bloodsport Witness 20-inch from Bloodsport
See today’s price on the Witness 20-inch$36.30

$42.92 15% off

#ad How we are funded · Price as of November 19, 2026

Bloodsport Witness 20-inch

Bloodsport
9.4/ 10

Six bolts with the full dimensional picture published: .300 inch inside diameter, .344 outside, .003 straightness, and a 95-grain brass insert in the 20-inch version. The Blood Ring near the nock is a genuinely useful idea — the color on the ring after a hit tells you something about where the arrow went.

Published specValue
Length20 in (22 in also offered)
Inside diameter0.300 in
Outside diameter0.344 in
Straightness0.003 in
Brass insert95 gr (20 in)
NockHalf-moon, installed
FeatureBlood Ring hit indicator

Why we recommend it

  • Full dimensional specification published, which most budget bolts skip
  • Six per pack with a 95-grain brass insert already fitted
  • The Blood Ring gives you information after the shot
  • Rugged Wrap construction is built for 400 fps-plus bows

Good to know

Half-moon nocks only, so flat-nock bows need a different bolt

Our rubric

Flight
9.4
Penetration
9.4
Consistency
9.3
Durability
9.5
Value
9.7
04Lighted bolts for a Killer Instinct

Killer Instinct KillerTech Lighted 20-inch

Killer Instinct
9.1/ 10

430 grains complete with a 100-grain point, a .300 inside diameter and a lighted half-moon nock fitted at the factory, on a carbon composite shaft Killer Instinct spines for its faster bows. Straightness is published at .005 inch, which is the loosest figure on this site — this is the lighted-nock answer for a Killer Instinct, not the tolerance answer.

Published specValue
Length20 in
Weight430 gr with 100 gr point
Straightness0.005 in
Inside diameter0.300 in
Outside diameter0.346 in
NockHalf-moon, lighted, fitted at the factory
Vanes3 in
FitsNot published

Why we recommend it

  • Lighted nocks fitted at the factory rather than retrofitted
  • 430 grains complete is heavy enough for the largest quarry on this site
  • A .300 inch inside diameter is the standard crossbow size, so points and inserts are easy to source
  • Killer Instinct publishes weight, straightness and both diameters

Good to know

.005 inch straightness is the loosest tolerance published here

Our rubric

Flight
9.0
Penetration
9.4
Consistency
8.7
Durability
9.2
Value
9.2
05Excalibur Matrix series bows

Excalibur Diablo 18-inch

Excalibur
9.0/ 10

18 inches, 250 grains, .003 straightness, with a flatback insert for reliable string contact and a heavier front insert for front-of-center weight. 250 grains is light, and that is the Excalibur recurve design brief: these are built for the bows they are built for, and they fit the flat-nock CeaseFire pattern.

Published specValue
Length18 in
Weight250 gr
Straightness0.003 in
NockRhino, flat; CeaseFire compatible
Vanes2 in Blazer, 3-degree offset
InsertFlatback, with a heavier front insert for front-of-center
FitsAll Excalibur Matrix series

Why we recommend it

  • .003 straightness with a flatback insert for consistent string contact
  • Blazer vanes with a 3-degree offset stabilize quickly
  • Designed for CeaseFire bows and flat-nock patterns

Good to know

250 grains is light for anything bigger than deer

Our rubric

Flight
9.3
Penetration
8.5
Consistency
9.3
Durability
9.2
Value
8.7

The four patterns

Half-moon

A shallow curved groove across the back of the nock. The string lies in the groove, and the groove has to be turned so the string sits in it squarely - which is why half-moon nocks have an index to line up every time you load the bow. This is the dominant pattern on the market: the Bloodsport Witness, the Barnett Headhunter, the Easton XX75 Magnum and most of the factory arrows that come with budget and mid-range bows all use it.

What makes it good is how deeply the string seats, which gives you straight nock travel off the rail. What makes it a chore is that it is the only pattern you have to think about every single time you cock the bow. Load a half-moon nock a quarter turn out and the string pushes on one side of the groove harder than the other.

Flat

No groove at all - a square base that sits flush against the string. There is nothing to index, so you load the arrow and shoot. Excalibur's Rhino nock is the best-known flat nock and it is compatible with the CeaseFire system; the Excalibur Diablo in the picks above ships with it, and Excalibur recurve bows are built around it.

The trade is shallower string engagement. With nothing to sit in, the string can slide across the base of the nock more easily, which is one reason flat nocks are most common on recurve crossbows with wider string angles rather than on very narrow compound bows. Where a bow specifies flat, use flat - a half-moon nock on a flat-nock bow can let the string load one side of the groove and is not a substitution to make.

Capture, or C-nock

A nock whose walls wrap partly around the string so it cannot slip sideways off the base - the string is captured rather than resting. This is the older pattern on the list, built into a generation of crossbows that predates most of the current lineups, and it is the one that most often leaves a secondhand-bow owner holding arrows that do not fit.

That is exactly why the Nightmare Xtreme pack sits as high as it does on this page. Its listing supplies half-moon nocks and capture nocks both in the box for a 20-inch bow, whichever of the two yours turns out to want. One pack, both answers, which is the single most useful thing you can buy if you do not yet know what your string needs.

Proprietary bushed nocks

The current high-end approach: a nock pattern specific to one maker's bows, usually sitting on an aluminum bushing pressed into the shaft rather than straight into bare carbon. TenPoint and Wicked Ridge use the Alpha-Nock, Killer Instinct uses V-Track, Ravin uses its own, and there is no cross-compatibility between them.

TenPoint publishes the clearest reasoning for it. The Alpha-Nock HP on the Pro Elite 400 uses a deep groove with a large smooth radius base specifically to hold the string in place and prevent shoot-over and shoot-under, and TenPoint credits the design with 28 percent more string-to-nock engagement on its narrow bows, with the aluminum bushing taking the shock instead of the carbon. On very narrow bows the string wraps around the nock at a severe angle, and that is the case these nocks exist to solve.

Which pattern each pick uses

BoltNock patternIndexing neededTypical bow
TenPoint Pro Elite 400Alpha-Nock HP on an aluminum bushingNoTenPoint and Wicked Ridge
Nightmare Xtreme 20-inchHalf-moon and capture nocks both includedYes, with the half-moon nocks fittedModern moon-nock bows and older capture-nock bows
Bloodsport Witness 20-inchHalf-moon, installedYesMost mid-range forward-draw bows
Killer Instinct KillerTech LightedHalf-moon, lighted, fitted at the factoryYesKiller Instinct and other 20-inch moon-nock bows
Excalibur Diablo 18-inchRhino, flat; CeaseFire compatibleNoExcalibur Matrix series
Three of the five need indexing, which is the practical difference you will feel most in a cold treestand.

How to tell which nock your bow needs - in about ten seconds

  1. Pick up a factory arrow that came with the bow. It is the authoritative answer, and it beats anything written on a web page including this one.
  2. Look at the back of the nock. A curved groove across it is a half-moon. A square, grooveless end is flat. Walls that curl in around where the string would sit are a capture or C-nock.
  3. Look for a brand name molded into it. Alpha-Nock, V-Track or a maker's logo means proprietary: replace it with the same part, from the same maker, and nothing else.
  4. Look for a metal ring at the back of the shaft. That is an aluminum bushing, and a bushed shaft expects the bushed nock that goes with it.
  5. If the bow is current and you have lost the arrows, check the maker's site for the specified arrow. If the bow is old and unlabeled, the universal pack is the safe purchase.

Indexing a half-moon nock, properly

The groove must be perpendicular to the rail so that the string loads both sides of it evenly. In practice: cock the bow, lay the arrow in the rail, and rotate it until the groove sits squarely on the string with the odd-colored vane in the position your bow's manual specifies - usually pointing down into the rail slot on a flat-rail bow.

Two habits make this reliable. First, mark the nock or use the factory index mark, so you are matching a mark rather than eyeballing a groove in poor light. Second, build the rotation into your loading routine rather than treating it as a check you do when you remember. If you hunt from a blind in the dark, practice it in the dark. How to cock a crossbow covers the whole sequence this fits into.

Lighted nocks are an overlay, not a fifth pattern

A lighted nock is still a half-moon, a flat or a proprietary nock - it just has a battery and an LED in the body, triggered by the shot. The Killer Instinct KillerTech ships with a lighted half-moon fitted at the factory, so it indexes exactly like any other half-moon. Retrofit units work the same way: they replace the nock you have with a lit nock of the same pattern, usually with a bushing or an adapter to match your shaft's inside diameter.

Three things to know before buying one. It adds weight at the very back of the arrow, which shifts front-of-center the wrong way. It needs the right internal diameter for your shaft. And lighted nocks are prohibited for hunting in some states, separately from the rules about crossbows. Crossbow bolts with lighted nocks covers the retrofit options and the legality question properly.

Replacing a nock, and when not to

On a shaft with a bushing, the nock pulls out and a replacement of the same pattern presses in. On a plain carbon shaft with a glued nock, the replacement is still routine but you are working on the end of the shaft, and that is the part worth inspecting anyway. Replace a nock the moment you see a cracked groove wall, a chipped base, or a nock that will not stay indexed.

When not to: do not fit a different pattern than your bow specifies to make an arrow work, do not shoot a shaft whose nock end shows any splintering, and do not mix two nock patterns across one quiver. Different nocks weigh different amounts and seat to different depths, which means a different point of impact for each - the opposite of what a quiver is for. If you are choosing arrows for the season, best crossbow bolts for deer ranks six-packs on how tightly they are matched to each other.

Which pack to buy for your situation

  1. You do not know what nock your bow needsNightmare Xtreme 20-inch - half-moon and capture nocks both in the box
  2. TenPoint or Wicked Ridge bowTenPoint Pro Elite 400 - Alpha-Nock HP on an aluminum bushing, no indexing
  3. A standard 20-inch moon-nock bowBloodsport Witness - half-moon fitted, full dimensions published
  4. Excalibur Matrix seriesExcalibur Diablo 18-inch - Rhino flat nock, CeaseFire compatible
  5. You want a lit nock out of the boxKiller Instinct KillerTech - lighted half-moon, where it is legal to hunt with one See the picks

The short version

Four patterns, one of them yours, and your bow picked it rather than you. Match a factory arrow, index a half-moon every time you load, replace a damaged nock instead of shooting it, and never substitute one pattern for another to make an arrow fit. If the question is unresolved, the universal pack costs less than being wrong once.

Frequently asked questions

What are the different types of crossbow nocks?
Four: half-moon, with a curved groove the string seats into; flat, with a square grooveless base; capture or C-nock, whose walls wrap around the string; and proprietary bushed nocks such as TenPoint's Alpha-Nock, Killer Instinct's V-Track or Ravin's own. They are not interchangeable with each other.
How do I know what nock my crossbow uses?
Look at an arrow that came with the bow. A curved groove is a half-moon, a square end is flat, inward-curling walls are a capture nock, and a molded brand name means proprietary. A metal ring at the back of the shaft is an aluminum bushing, which expects the matching bushed nock.
Can I use a half-moon nock on a flat-nock crossbow?
No. Use the pattern your bow specifies. A half-moon on a bow built for a flat nock can let the string load one side of the groove and sit off-center on the latch, which is inaccurate at best and a dry-fire risk at worst.
What is a capture nock or C-nock?
A nock whose walls wrap partly around the string so it is held rather than resting in a groove. It is common on older crossbows, which is why a pack like the Nightmare Xtreme 20-inch supplies capture nocks alongside half-moon nocks in the same box.
Do half-moon nocks have to be lined up every time?
Yes. The groove has to sit square on the string, which means rotating the arrow so the groove is perpendicular to the rail and the index vane is where your manual specifies. Flat and proprietary bushed nocks do not need this, which is their main practical advantage.
Are lighted nocks a different type of nock?
No. A lighted nock is a half-moon, flat or proprietary nock with an LED and a battery in the body, so it indexes the same way the unlit version does. It does add weight at the back of the arrow, and it is prohibited for hunting in some states.

Our recommendation

Top pick

TenPoint Pro Elite 400

9.5/ 10

Six matched 20-inch shafts with the front-of-center figure published.

Runner-up

Nightmare Xtreme Crossbow Bolts, Half-Moon and Capture Nocks

9.2/ 10

One 20-inch pack that fits a moon-nock bow and a capture-nock bow.

Brands: want your product tested? For Brands.

Sources

TenPoint Pro Elite 400 from TenPoint

Bolts & Broadheads

The best crossbow bolts for deer

Five crossbow bolts for deer, ranked on how many come in the pack, what straightness and weight sorting the maker publishes, and whether the nock matches your string.

TenPoint EVO-X Lighted CenterPunch16 from TenPoint

Bolts & Broadheads

Crossbow bolts with lighted nocks

How lighted nocks work on a crossbow, the legality check to do first, and four ways to get them - three factory-lit bolts and one retrofit nock.

Carbon Express Maxima Contour Crossbolts from Carbon Express

Bolts & Broadheads

The best crossbow bolts

Five bolt sets ranked on published straightness and weight sorting, with the four compatibility checks that come first.

Bohning Tex-Tite Bowstring Wax from Bohning

Guides

Crossbow safety

The four crossbow safety rules that prevent real injuries, plus the hardware that backs them up and the storage rules.

Crossbows sorted by what you can actually cock, carry and shoot quietly.